Hydraulic wheel presses
High-automated wheel presses with two press cylinders, e.g. types RP 2000/3000 2P (P) |
|
|
With two press cylinders
for the pressing on and off of up to six wheel set components (e.g.
two wheels and four brake disks) in one setting or wheels and
other components of heavy locomotive wheel sets, as for example
ICE-driving wheel sets.
- pressing force of 2,000 to 5,000 kN
- centering of the wheel set during the pressing on and off
process
- design as rolling-in or rolling-through type
- charging of the wheel press by means of a manually operated
or automatically driven charging trolley
- automatic positioning of the wheel set components on the
axle by means of a laser-operated measuring device
- measuring of the radial and axial run out and post measuring
of the wheel sets after the pressing on
- automatic recording of the course of the force and stroke
for each pressed on component
- computer-controlled operation of the wheel press
- storage in a data-bank of all wheel set data of the
different types
|
|
Universal hydraulic wheel presses
with one press cylinder and centering device, e.g. types RP 2000/3000 1P |
|
|
With one press cylinder
and centering device at the rear column for the universal pressing
on and off of wheel set components.
- pressing force of 2,000 to 5,000 kN
- centering of the wheel set during the pressing on and off
process
- charging of the wheel press by means of workshop- or bridge
crane
- automatic positioning of the wheels by means of a
laser-operated measuring device
- pre-selectable ram stroke for the easy positioning of brake
disks or gear components
- pre-assembly of the wheel set components onto the wheel set
axle on an assembly stand
- automatic recording of the course of the force and stroke
for each pressed on component
- computer-controlled operation of the wheel press
- storage in a data-bank of all wheel set data of the
different types
|
|
Hydraulic wheel presses
with one press cylinder with integrated additional hydraulic barrel and centering device at the rear column,
e.g. types RP 2000/3000 1PP |
|
|
Hydraulic wheel presses
type RP 3000 1PP and type RP 2000 1PP (wheel presses during commissioning in the
Künstler workshop)
With one press cylinder with integrated additional hydraulic
barrel and centering device at the rear column for automatic
pressing on of wheels onto freight wagon wheel sets.
- pressing force 3,000 kN and 2,000 kN
- centering of the wheel set during pressing on process
- charging of the wheel press by means of a manually operated
charging trolley
- automatic positioning of the wheels by means of a
laser-operated measuring device
- pre-assembly of the wheel set components onto the wheel set
axle on the charging trolley
- lowering of the wheel set after pressing on and rolling out
to the rear side of the wheel press
- automatic recording of the course of the force and stroke
for each pressed on wheel
- computer-controlled operation of the wheel press
- storage in a data-bank of all wheel set data of the
different types
|
|